Dies ist eine alte Version des Dokuments!
Ich habe dem Raspberry Pi 2. Dazu wird benötigt
Download:
https://www.raspberrypi.org/downloads/raspbian/
Dieses Image muss nun auf die SD-Karte geschrieben werden.
unzip <image.zip> dd bs=4M if=2015-11-21-raspbian-jessie.img of=/dev/mmcblk0
In /etc/network/interfaces
auto lo iface lo inet loopback iface eth0 inet dhcp auto wlan0 allow-hotplug wlan0 iface wlan0 inet static address 192.168.0.2 netmask 255.255.255.0 gateway 192.168.0.1 wpa-ap-scan 1 wpa-scan-ssid 1 wpa-ssid "DEIN-WLAN-NAME" wpa-psk "DEIN-WLAN-SCHLÜSSEL"